Question 1

How much does an epoxy garage floor cost in Albuquerque?

Accepted Answer

Most two-car garage flake floors in the Albuquerque area run $1,500–$4,000 depending on square footage, concrete condition, and the coating system. Polyaspartic systems cost more than basic epoxy but cure in a day and handle New Mexico's UV and temperature swings far better. Call (505) 333-5653 and we'll give you a firm, written quote — free.

Question 2

What systems do you install?

Accepted Answer

Four: polyaspartic flake floors (the premium garage system), epoxy garage floors (the classic, budget-friendly coating), concrete polishing (grind, hone, and polish to a glassy, low-maintenance finish), and grind-and-seal (smooth the slab and lock it down with sealer — a durable middle ground). See our services pages for each system, or browse floors by space.

Question 3

Epoxy vs. polyaspartic — what's the difference?

Accepted Answer

Epoxy is the classic, budget-friendly garage coating. Polyaspartic is the newer chemistry: it cures in hours instead of days, stays flexible through freeze-thaw cycles, and won't yellow in sunlight the way epoxy can. For New Mexico garages with big sun exposure and 40-degree temperature swings, we usually recommend polyaspartic — but we'll walk you through both and price each.

Question 4

How long does installation take?

Accepted Answer

A standard residential garage takes 1–2 days: day one for diamond grinding and prep, then the coating system goes down. Polyaspartic topcoats cure fast — you can usually walk on the floor the next day and park on it within 48–72 hours. Polished concrete and larger commercial jobs run 3–5 days.

Question 5

What does 'one-day cure' actually mean?

Accepted Answer

It means a polyaspartic system cures in hours, not days. You can usually walk on it the next day and park on it within 48–72 hours. It does not mean every job finishes in a single calendar day — prep, slab condition, and square footage still set the schedule, and your quote will include a realistic timeline.

Question 6

Why is prep such a big deal?

Accepted Answer

Peeling almost always comes from skipped surface prep. We diamond-grind every floor to open the concrete's pores, repair cracks, and moisture-test before a drop of coating goes down. Coatings fail from bad prep, not bad product — so we don't cut corners there. Ever.

Question 7

Will the coating peel or hot-tire pickup?

Accepted Answer

Not when it's prepped right. Hot-tire pickup and peeling are prep failures, not product failures. Diamond grinding, crack repair, and moisture testing are how we keep a floor down for years instead of months.

Question 8

How do I clean and maintain my floor?

Accepted Answer

Sweep or dust-mop regularly and damp-mop with a mild, pH-neutral cleaner. Avoid harsh solvents and abrasive pads. Flake and polished floors are low-maintenance by design — no waxing, no carpet cleaning, and spills wipe up instead of soaking in.

Question 9

How durable are these floors?

Accepted Answer

Properly prepped and coated floors handle daily vehicles, foot traffic, tools, and New Mexico temperature swings. Durability depends on the system, the slab, and use — a garage with daily drivers and a basement with light foot traffic are different jobs, and we'll match the system to the use.

Question 10

Do you only work in Albuquerque?

Accepted Answer

No. We're based in Albuquerque and regularly travel to Rio Rancho, Bernalillo, Corrales, Placitas, Los Lunas, Santa Fe, Los Alamos, Edgewood, and most cities within about a 2-hour drive. If you're in central or northern New Mexico, call us — we probably cover you.

Question 11

Do you do commercial work?

Accepted Answer

Yes. We do shop floors, warehouses, restaurant kitchens, retail spaces, and office buildouts — polished concrete and grind-and-seal are popular for commercial because they're durable and easy to maintain. We can work around your hours to minimize downtime.

Question 12

How does the quote process work?

Accepted Answer

Call (505) 333-5653 or request a quote online. We respond within one business day — usually much faster. Then a free on-site estimate: we measure, check your slab's condition, and give you a firm written price. No charge, no obligation, no high-pressure sales pitch.

Question 13

Do I need to be home for the estimate?

Accepted Answer

For garages and exterior-access spaces, usually not — just make sure we can get to the slab. For interior work, yes, we'll need access.

Question 14

Is financing available?

Accepted Answer

Financing options are available for residential customers — ask during your quote and we'll walk through what's currently available. We don't publish lender terms here because they depend on the lender and your project, and we only offer financing to residential customers, not commercial clients.

Question 15

What warranty do you offer?

Accepted Answer

A 15-year workmanship warranty. It covers adhesion and peeling — if the coating fails because of something we did, we fix it. What it can't cover is damage from slab issues we flagged and you declined to address, like active moisture intrusion.

Question 16

Can I see examples of your work?

Accepted Answer

Our gallery page is being built with real job photos from Sam's recent work. Until those photos are in, the gallery shows the categories we're collecting — no stock photos, and nothing presented as a real job unless it is one.

Questions, Answered Straight

Full FAQ

Ready for floors that work as hard as you do?